Grundig GRP6000 manual Connection and Preparation, Connecting the television and VCR …

CONNECTION AND PREPARATION

Connecting the television and VCR …

TV

Aerial

… using aerial (RF) cables

1Connect the cable of your TV aerial to the »Aerial In« socket on the Receiver/Player.

2Connect the short aerial from the »Loop Through« socket to the »RF IN« socket, both on the Receiver/Player.

3Connect the long aerial lead from the »RF Out 1« socket to your TV or VCR »Aerial IN«

… using SCART cables

1Plug the standard SCART cable (supplied) into the »TV« scart socket on the Receiver/Player and the appropriate socket for RGB reproduction on the TV set. See TV user guide for details on this.

2Plug a standard SCART cable (not supplied) into the »VCR« scart socket on the Receiver/Player and the TV socket on the VCR.

3If required connect the other devices as shown in the diagram above.

4If you wish to connect the Receiver/Player to your HiFi system for improved sound, plug standard phono cables into the »AUDIO OUT L R« sockets and into the appropriate sockets on your HiFi system.

… using a Y/C cable (S-Video) and phono cables

1Plug a standard Y/C cable into the »S-VIDEO« socket on the Receiver/Player and into the appropriate socket (S-VIDEO IN) on the television.

2Plug standard phono AV cables into the »AUDIO OUT L R« sockets on the Receiver/Player and the appropriate sockets (AUDIO IN) on the television.

Note:

As this product is a combination product, this manual will deal with the two halves of the product separately. To switch between the two modes (TV mode and Disc mode) press the » « key.

If the Receiver/Player is connected via the »S-VIDEO« socket, before you can use Disc mode, you must carry out the setting described in “Selecting the video output socket” in the Disc section of this book.

9