4.Raise the top of the keyboard, then lift the keyboard up and out of the notebook.
5.Lay the keyboard face down on the top case, forward of its normal position, and disconnect the ribbon cable from the motherboard.
Warning
Do not touch the metal surfaces inside the notebook until they have cooled off. They could be very hot if the notebook was running recently.
Figure 16. Disconnecting the Keyboard
Reassembly Notes
•Lay the keyboard face down on the top case, forward of its normal position, and reconnect the ribbon cable.
•Slip the metal tabs on the bottom of the keyboard into their slots in the top case, then lower the keyboard into place.
zt1100/xz200 and xt1500 Series | Removing and Replacing Parts | 49 |
Troubleshooting and |
|
|
