3D Connexion XZ200 Resetting the Notebook, Changing the Boot Device, Pressing the Reset Switch

Models: XT1500 XZ200 ZT1000

1 58
Download 58 pages 11.29 Kb
Page 13
Image 13
Resetting the Notebook

Resetting the Notebook

If Windows or the notebook stops responding and you cannot turn the notebook off, try the following in the order listed. Press the power button to restart.

If possible, restart or turn off the notebook from within Windows: click Start, Turn Off Computer, Restart (or Turn Off).

Press Ctrl+Alt+Del, then click Shut Down, Restart (or Turn Off).

Press and hold the power button for about four seconds.

Use a pen or straightened paper clip to press the reset switch on the back of the notebook.

Figure 7. Pressing the Reset Switch

Changing the Boot Device

The notebook normally boots from its internal hard disk. You can also boot the notebook from an external USB floppy disk drive (optional accessory), the CD/DVD drive, or a local area network (LAN).

1.Restart the notebook: click Start, Turn Off Computer, Restart.

2.When the HP logo appears, press Esc to display the Boot menu.

3.Use the arrow keys to select the boot device, and press Enter.

If you want to boot from a specific device whenever it is present, change the boot order using the BIOS configuration utility—see “Using the BIOS Configuration Utility” on page 34.

zt1100/xz200 and xt1500 Series

Product Information

13

Troubleshooting and Self-Repair Guide

 

 

Page 13
Image 13
3D Connexion XZ200, ZT1000, XT1500 manual Resetting the Notebook, Changing the Boot Device, Pressing the Reset Switch