If you can’t type the euro symbol
•Hold Alt GR when you press the marked key.
•The euro symbol is not on the U.S. English keyboard. Make sure the embedded keypad is active (Fn+F8) and Num Lock is on, then press and hold Alt while typing 0128 on the numeric keypad.
•Support for the euro symbol requires software available from Microsoft. This software is installed in the factory software, but may not be included with retail Windows.
If a special feature on a USB mouse doesn’t work
•Make sure you installed any drivers included with the mouse.
•Restart the notebook, so that it will detect the mouse.
LAN Problems
If the
•Check all cables and connections. Try connecting at a different network station, if available.
•If the green light next to the LAN port does not light, the LAN cable may not be connected to the network or the network may be down. Try connecting a different computer to the cable.
•Use the networking problems troubleshooter in Windows Help and Support.
•Click Start, Control Panel, Performance and Maintenance, System. On the Hardware tab, open the Device Manager. If the network interface is disabled, try to enable it. If it has a conflict, try disabling another device.
•Click Start, Control Panel, Network and Internet Connections, Network Connections. Make sure you have the correct clients and protocols installed.
•Make sure the LAN cable is Category 3, 4, or 5 for
If you can’t browse My Network Places
•Click Start, Search to look for a computer.
If you can’t log in to Netware servers
•If a Netware server is using IPX/SPX protocol, you may need to force your frame type to match the server’s frame type. Check with your network administrator.
If the notebook stops responding after booting
•Check whether you have a TCP/IP network with no DHCP server. This can cause a long delay at startup because DHCP is enabled. Contact your network administrator to determine the proper TCP/IP configuration.
22 | Troubleshooting and Diagnostics | zt1100/xz200 and xt1500 Series |
|
| Troubleshooting and |
