Figure 12. Removing the Mini-PCI Card

Figure 12. Removing the Mini-PCI Card

Reassembly Notes

Reattach the cable(s) to the card, and tuck them into the compartment.

Gently press the card into the connector at an angle of about 30°, until it is fully inserted. Then press down on both sides of the card until the latches snap closed.

zt1100/xz200 and xt1500 Series

Removing and Replacing Parts

45

Troubleshooting and Self-Repair Guide

 

 

Page 45
Image 45
3D Connexion ZT1000, XZ200, XT1500 manual Removing the Mini-PCICard, Reassembly Notes, zt1100/xz200 and xt1500 Series