27 Troubleshooting
If an error occurs, please consider these instructions before you have the device repaired. If you are unable to solve a problem despite these instructions, please consult the hotline. Don’t try repairing the device yourself under any circumstances. In that event the device would lose its warranty.
Deutsch
| Problem |
| Cause |
| The frame can’t be |
| The disassembly key was not |
| slid off the device |
| |
|
| inserted correctly. | |
| towards the rear |
| |
|
|
| |
|
|
|
|
|
|
| The connection cables haven’t |
| The device does not |
| been attached correctly. |
| play back any music |
| The “MUTE” or “PAUSE” button |
|
|
| are pressed. |
|
|
| On / off button was pressed too |
|
|
| briefly. |
|
|
| The operating unit isn’t inserted |
|
|
| correctly. |
| The device can’t be |
| The operational contacts are |
|
| soiled. | |
| turned on |
| |
|
| The ignition is turned off. | |
|
|
| |
|
|
|
|
|
|
| The connection cables haven’t |
|
|
| been attached correctly. |
|
|
| The fuse is blown. |
Solution
Reinsert the key. Make sure that the protrusion on the disassembly key points away from the device during the insertion.
Please check if all cables have been attached correctly.
Press the “MUTE” or “PAUSE” button again.
Keep the on / off button pressed longer.
Reinsert the operating unit.
Clean the operational contacts.
Turn on the ignition.
Please check if all cables have been attached correctly.
Replace the fuse.
English
77
