Dolby digital settings

Equalizer settings

3D Effect settings

HDCD

LPCM (linear PCM) OUTPUT allows you to select either the audio CD standard (48K) or the DVD standard (96K).

Through this menu you can adjust the behaviour of the Dolby function according to your own preferences and determine the desired type of output. Stereo = stereo sound, R-mono and L-mono each play back the sound only through the selected channel. The setting mix-mono only functions during the DVD playback with DTS 5.1.

In addition, you have the option of setting the level of the linear compression. Different levels are available to you here (OFF, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, FULL).

Through this function you can adjust the tone colour of the output sound according to your own preferences.

Through the EQ type, you can select the preset sound settings.

The menu item bass increase just allows you to increase the bass frequencies.

With super bass, you have an additional option of increasing the bass output. The setting treble increase also allows you to increase the treble levels correspondingly.

Through this function you can adjust the sound effects of the output sound according to your own preferences.

The echo mode setting enables you to select one of the preset reverberating effects.

The HDCD function enables you to carry out certain settings if you are using such a data carrier. Because of the low market distribution of this type of data carrier, this function is turned off by default.

Deutsch English

63

Page 63
Image 63
Silvercrest CDV-710 important safety instructions Hdcd