Deutsch
English
21.2 LOUD function for the tone setting – loudness
The “LOUD” function makes it possible to emphasize low and high frequencies through the push of a button in order to increase sound perception in an adjustment to the respective volume.
To activate the “LOUD” function, press the control dial 
until menu level 2 is reached. The “LOC” function will appear. Press the control dial 
repeatedly until you get to the menu item “LOUD”. There you will have the option of activating (“LOUD ON”) or deactivating (“LOUD OFF”) the function by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial 
or through automatic memory (don’t change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial 
, you will reach the next possible setting. If you use the automatic memory, the device will return to the standard display.
Note:
When the “LOUD” function (“LOUD ON”) is activated, the message “LOUD” appears on the display. This is turned off after deactivation.
21.3 ST – MO function to switch between stereo and mono playback
This menu item gives you the option of selecting between stereo and mono playback.
To reach the menu, press the control dial 
until menu level 2 is reached. The “LOC” function will appear. Now briefly press the control dial 
repeatedly until you reach the menu item “ST- MO”. There you will have the option of selecting between “ON” and “OFF” by turning the dial. The selection “ON” will turn the mono playback on. “OFF” will turn the stereo playback back on again.
56
