Illustr. 8.5

Illustr. 8.6

Illustr. 8.7

8.5Removal

Turn off the device. Remove the operating unit and place it into the case. Clamp off the negative pole of the vehicle battery for the duration of the disassembly. First remove the front frame of the device by inserting a flat

object (e.g. the back of the disassembly key) between the device and the panel to the right and left of the short side of the frame and carefully levering the panel out towards the front. Then insert the two disassembly keys into the openings on both sides of the front of the device and slide these until the stop. Make sure that the protrusion on the disassembly key, illustr. 8.2, points away from the device during the insertion. Slowly and carefully pull out the device. Remove the cable and antenna from the device.

Note:

Make sure that no vehicle cable can cause a short circuit after the device has been unplugged.

Deutsch English

19

Page 19
Image 19
Silvercrest CDV-710 important safety instructions Removal