10 Operation of the monitor

Open the monitor by briefly pressing the “OPEN” button . Now the monitor is opened automatically and fixed in the flipped-open position. The monitor can be closed again by pressing the “OPEN” button again.

If the monitor doesn’t close as a result, it may not be in the correct position. Then there will be the error message “ERROR – MONITOR NOT CENTERED!!”

Note:

Before beginning to drive, please familiarize yourself sufficiently with the device and avoid longer entries during the drive for your own safety!

10.1 Swivelling the monitor outward

To better read and operate the screen, it’s possible to swivel the monitor of the device by about 30° to the right and left. For this, first open the monitor with the “OPEN” button as described above. Then you can swivel the monitor by pulling it towards you carefully from the lower right or left edge of the screen. Never use force during the process, otherwise you might damage the device. To swivel the monitor back, just press it back into the original position.

Illustr. 10.1

23

Deutsch English

Page 23
Image 23
Silvercrest CDV-710 important safety instructions Operation of the monitor, Swivelling the monitor outward