Silvercrest CDV-710 important safety instructions Radio hasn’t been

Deutsch

English

Problem	Cause
	The radio hasn’t been
	connected correctly.
The device doesn’t	The device temperature is too
	high.
retain the stored
stations	Contacts 4 and 7 haven’t been
	connected properly or the
	vehicle manufacturer has
	assigned these in reverse.
Data carrier isn’t	Data carrier wasn’t recognized
being drawn in
	by the insertion technology.
completely.
	The CD/DVD was inserted with
	the printed side to the bottom.
	The CD/DVD has too many
	scratches.
The inserted	The CD/DVD is dirty.
	The device temperature is too
CD/DVD can’t be
played.	high.
	The coating on the data carrier
	is faulty (very rare)
	The CD/DVD contains incorrect
	or faulty data.

Solution

Please check if all cables have been attached correctly.

Reduce the volume of the device.

Contact your vehicle manufacturer or a specialised workshop and purchase a fitting adapter set there.

Remove the data carrier and insert it again.

Flip the CD/DVD over and try again.

Create another CD/DVD from the original or have the CD/DVD repaired.

Clean the CD/DVD (without cleaning materials, just a lint-free cloth).

Reduce the volume of the device.

Purchase another type of data carrier and create the data carrier again.

The CD/DVD can’t be used with this device. Please burn your audio data onto a separate data carrier and try again.

78