06 Advanced functions
To change the order of a channel
1.Press [green] and then move it using [P] and [Q]. To save its position, press [OK].
To rename a channel
1.Highlight the channel you want to rename and press [yellow].
2.Rename the channel using the
3.Press [green] to save.
Press and hold [P] or [Q] to move to a page up and a page down.
Don’t Forget! Your digital box is always searching for new channels and channels that no longer broadcast programmes. Channels that no longer broadcast programmes will be marked ‘DEL’ and you should delete them. To delete a channel see the channel
TV
Television type
Television type lets you tell the digital box whether you have a standard or widescreen TV.
1.Press [menu] to open the main menu.
2.Press [5] or use [Q] to highlight the ‘System
3.Press [OK] to select the ‘TV
4.To change the
If you have a widescreen TV choose ‘16:9 widescreen’.
If you have a normal 4:3 TV choose ‘4:3’.
You can then select the widescreen option of letter box or centre
1.Press [Q] to highlight widescreen and use the [T] or [U] buttons to select.
Letter box – shows a black border on the top and the bottom of the screen when you are watching a widescreen broadcast on a 4:3 TV.
Centre
Advanced functions
Setting the viewing standard
To change the viewing standard
In the ‘TV
1.Use [Q] to highlight ‘standard’.
2.If you have an RCA connector, set the standard to CVBS.
3.If your TV supports
Don’t Forget! The default standard is RGB. If you’re using a normal SCART lead, this setting gives you the best picture quality.
06
General
If you choose to disable the low power mode and the inactivity features on your box you can do this in the general
1.Press [menu].
2.Press [5] or use [Q] to highlight the system
3.Press [4] or use [Q] to highlight the general
4.Use [T] and [U] to change between on and off.
5.Press [red] to return to the previous menu.
Don’t Forget! Low power mode saves energy. It is recommended you always have it set to ‘on’.
4:3 Letter box | 4:3 Centre |
30
31