07 Device management
Lights on the front of the digital box
If the light on the left of the box is red the digital box is in standby. When the digital box is turned on the light will be green. It also indicates the remote control is working by flickering between green and red.
Each USB port on the front of the digital box has two lights, one green and one red.
What the lights on USB ports mean:
When the USB device has been inserted correctly and is in ready status the green light shall be lit.
When the USB device is playing or copying to another device the relevant green light shall flash.
When the USB device is recording the relevant red light shall be lit.
When the USB device is being copied to by another device the relevant red light shall flash.
Retuning instructions
Retune channels
If you are missing channels, channel information or would like to search for new channels available, you should scan at any time.
To retune channels
1.Press [menu].
2.Press [5] or use [Q] to highlight the ‘System
3.Press [2] or use [Q] to highlight ‘Channel
4.Press [3] or use [Q] to highlight ‘Channel Tuning: Full scan’ option to start a full scan and replace all existing channels.
‘Channel tuning: full scan’ scans for new channels and adds them to your
The receiver may pick up channels from more than one region and you will be asked to select the region you want to watch channels from.
08
1.Press [P] and [Q] to select and [OK] to choose.
34
35