Retune channels

If you are missing channels, channel information or would like to search for new channels available, you should scan at any time.

To retune channels

1.Press [menu].

2.Press [5] or use [Q] to highlight the ‘System set-up’

3.Press [2] or use [Q] to highlight ‘Channel set-up’

4.Press [3] or use [Q] to highlight ‘Channel Tuning: Full scan’ option to start a full scan and replace all existing channels.

‘Channel tuning: full scan’ scans for new channels and adds them to your line-up. It then deletes all channels that are no longer broadcast. If you cancel this scan part way through, you will keep your existing channels.

The receiver may pick up channels from more than one region and you will be asked to select the region you want to watch channels from.

1.Press [P] and [Q] to select and [OK] to choose.

For other ways to retune please read the ‘Retune Instructions’ section of this guide.

Kev058701

Rev141209

46