Grundig Sonoclock 890 WEB manual Connection And Preparation, Connecting the power cord

Models: Sonoclock 890 WEB

1 60
Download 60 pages 56.78 Kb
Page 12
Image 12
CONNECTION AND PREPARATION ----

CONNECTION AND PREPARATION ----

Connecting the power cord

1

Note:

Check that the mains voltage on the type plate (on the back of the device) corresponds to your local mains supply. If this is not the case, contact your specialist dealer.

Plug the power cord into the wall socket.

Caution:

The device is connected to the mains with the power cord. Pull out the power plug when you want to completely disconnect the device from the mains.

Unplug the mains plug to disconnect the device from the mains. Make sure the power plug is easily accessible during operation and not hindered by other objects.

Connecting an MP3 player or a USB memory stick

Note:

The device is ready for connection to an MP3 player or USB memory stick. The device is only able to play MP3 data formats after a software update. The software update is available on www.grundig.com.

Important:

The device must be switched off while the USB connection is being made. If it is not switched off, data can be lost.

1Connect the USB interface of the MP3 player to the »USB«

(type A) socket on the device using a standard USB cable

or

Insert the USB plug of the USB memory stick in the USB socket »USB« (type A) on the device.

Connecting an external device

Note:

Switch the device off before you connect external devices.

1 Use standard audio cables to connect the audio outputs of the external device to the »AUX IN« socket on the device.

12

Page 12
Image 12
Grundig Sonoclock 890 WEB manual Connection And Preparation, Connecting the power cord, Connecting an external device