Pure Digital 200i owner manual Connection, Contour name assignment, Automatic wireless setup

Connection

The Connection tab is divided into two main sections, Contour Name Assignment and Wireless Setup.

Contour Name

Assignment

Wireless Setup

Contour name assignment

See page 9 for more information on how to assign a unique name for Contour.

Automatic wireless setup

See page 9 for information on automatic wireless setup.

Manual wireless setup

If your wireless network is not broadcasting an SSID, you will need to configure your wireless settings manually.

1.Select ‘Configure Manually’ from the Network drop-down list and select the encryption type of your wireless network from the drop-down list below. Contour supports the following encryption types:

•No Encryption Select this option if your wireless network is unsecured.

•	WEP	Select this option if your wireless network is being secured using the
		Wired Equivalent Privacy (WEP) method.
•	WPA	Select this option if your wireless network is being secured using the
		Wi-Fi Protected Access (WPA) method.
•	WPA2	Select this option if your wireless network is being secured using the
		Wi-Fi Protected Access II (WPA2) method.

Note: Please check your wireless router configuration to find out the type of encryption that is being used on your wireless network.

2.Enter the passphrase/key needed to connect to your network in the box below, if one is required.

3.Click Connect. The Status LED will then flash red to indicate that Contour is resetting. When Contour has started up it will enter Sleep mode.

16