Upgrade | Pure Digital 200i guide

Upgrade

The Upgrade tab is only visible when you connect to Contour with an Ethernet cable. We recommend using automatic software updates for your Contour, which are delivered via the Wi-Fi connection when Contour is in Standby or Sleep mode. If the Status LED on Contour is static amber, a new version of software is being installed. A software update takes between six to eight minutes.

Note: Do not power off Contour while a software update is taking place.

Note: The controls on Contour and the remote control will not function during an automatic software upgrade.

Note: If you experience any problems with automatic software updates, see the following page for information on how to update the software manually. If you need to carry out a manual software upgrade, we recommend that you carry out the upgrade by using a directly connected PC. (See page 21 for more information).

Software Displays the date that the currently loaded software was created on. Date

Software Displays the version of software that is currently loaded on Contour. Version

Upgrade Click Upgrade to start the manual software upgrade. Refer to the next page for more detailed information.

19

Image 19

Pure Digital 200i owner manual Upgrade

Contents

Page FCC Notice to a User in the United States Contents Contour 200i Air can be used in a number of different ways Remote controlGetting started Introduction Mute Volume down Volume up Aux Ethernet Controls and connectorsSoftware Upgrade Status Digital Coaxial Wi-Fi Setup Front panel Status LED Switching between Sleep, Standby and On Typical wireless setup Preparing Contour to use AirPlay with Wi-FiStage 1 Prepare Contour for wireless setup Position Contour in range of your wireless network Contour Setup Manager will be displayed Stage 2 Connecting your setup device to ContourStage 3 Accessing Contour Setup Manager Connecting using a temporary wireless network Stage 4 Assigning Contour a unique name Stage 5 Adding Contour to your wireless network Preparing Contour to use AirPlay with an Ethernet cable Typical Ethernet setup Insert the connector of the mains Streaming audio to multiple rooms Using AirPlay to play audioAllowing commands to be sent back to iTunes from Contour Playing audio from iTunes Playing audio from an iPod touch, iPhone or iPad Controlling your device Listening to a docked iPod/ iPhone/iPadCompatibility Docking your device Selecting the dock Using the digital output Using the auxiliary input Menu structure Using Contour Setup Manager Contour name assignment Automatic wireless setupManual wireless setup Connection Advanced Proxy Server Settings IP Address Status Signal Upgrade Upgrading software manually Manual software updates Software upgrade using a directly connected PC Click Upload Updating software using Contour Setup ManagerPage Hints and tips Help Disposal of Waste Electrical & Electronic Equipment Specifications What’s covered by this warranty? Pure Warranty Statement for AustraliaWhat do you need to do now? Page Chestnut Street, Suite San Francisco CA 102YLPure Vertrieb über Home Park Estate