Advanced

The Advanced tab is divided into two main sections, Proxy Server settings and IP address settings.

Proxy Server

Settings

IP Address

Settings

Configuring Proxy Server settings

If your network uses a proxy server to connect to the internet:

1.Tick the Use Proxy Server checkbox.

2.Enter the IP address of your Proxy Server into the Proxy Server box.

3.Enter the port number being used by your Proxy Server into the Proxy Server Port box.

4.Click Connect at the bottom of the window to save any changes made.

Configuring IP Address settings

Contour supports both DHCP and static IP address configuration. To use DHCP, tick the DHCP checkbox and click Connect. To use a static IP address:

1.Enter the IP address that you want to assign to the Contour into the IP Address box.

2.Enter the subnet mask that you want to assign to the Contour into the Netmask box.

3.Enter the IP address of your network’s default gateway into the Gateway box.

4.Enter the IP address of the Primary DNS server being used on your network.

5.Enter the IP address of the Secondary DNS server being used on your network.

6.Click Connect to save any changes made.

17

Page 17
Image 17
Pure Digital 200i owner manual Advanced, Proxy Server Settings IP Address