TUNER MODE ________________________________________________________________

Selecting the tuner as the source

PRESET

18

!

E N E R G Y

f

PRESET

04

!

F A N T A S Y

f

PRESET

28

!MHz

F M 1 0 7 1 0

1Select the input source using the » TUNER /BAND« button.

The most recently selected station can be heard (Last Station Memory).

Display: e.g. »FM 100.60« or »ENERGY«.

Selecting the preset position

1Select the frequency band (FM or MW) by pressing the » TUNER /BAND« button.

2Press » 5a § « or » ss s6 « to move up and down channel positions one at a time.

– Display: e.g. »PRESET 04«, then the frequency or the station name.

Note:

Only free channel positions can be selected.

Stereo/mono reception

If the device is receiving an FM stereo programme »￿« appears in the display. However, if the signal from the FM stereo station is weak, you can improve the sound quality by switching to mono reception.

1Press »FM MODE« on the remote control to switch to mono reception.

– Display: » ￿« disappears.

2To switch back to FM stereo press »FM MODE« on the remote control.

– Display: »￿«.

Note:

If the device is set to stereo reception and is receiving a mono signal, the »￿« display flashes.

ENGLISH

21

Page 21
Image 21
Grundig UMS 4100 manual N T a S Y, Selecting the tuner as the source, Selecting the preset position, Stereo/mono reception