TUNER MODE_____________________________________________________________________________

PRESET

05

!

V i l r a d i o

f

RDS station service

RDS (Radio Data System) is an information system which is transmitted additio- nally by most FM stations.

If the device is currently receiving an RDS station, it displays the station name, for example » FANTASY«, and »f«.

Note:

It may take some time before all the RDS information is available.

Searching for RDS stations

1 Search for the desired RDS station by repeatedly pressing » 5a § « or

»ss s6 « until an RDS station is received and »f« appears in the display.

– After a short time the station name appears if the reception strength is sufficient.

Calling up RDS information

PRESET

 

 

 

05

 

 

 

!

 

MHz

 

F M 9 1

.

0 0

 

f

 

 

 

 

 

 

 

 

 

 

PRESET

 

 

 

05

 

 

 

 

 

 

!

 

 

 

1 1

: 4 7

 

f

 

 

 

 

 

 

 

If an RDS station is being received, the frequency briefly appears in the display, and afterwards the station name permanently.

1Press the »DISPLAY« button once on the remote control.

The wavelength and the frequency appear in the display.

2Press the »DISPLAY« button on the remote control again.

The time appears in the display.

3Press »DISPLAY« on the remote control for the third time.

The station name appears again in the display continuously.

Note:

The time display is updated every minute. The accuracy depends on the information transmitted by the station itself. You must be tuned to the RDS station for several minutes before the time information can be transmitted. During this procedure, »CT« flashes in the display.

ENGLISH

23

Page 23
Image 23
Grundig UMS 4100 manual RDS station service, Searching for RDS stations, Calling up RDS information