CONNECTION AND PREPARATION----
ENGLISH
15
Connecting an MP3 player or a USB memory stick
The hi-fi system supports most USB memory sticks or MP3 players.
Note:
The hi-fi system must be switched off while the USB connection is
being made. If it is not switched off, data can be lost.
1Connect the USB interface of the MP3 player to the »USB« socket
on the hi-fi system (under the flap), using a standard USB cable
or
insert the USB plug of the USB memory stick in the »USB« inter-
face on the hi-fi system (under the flap).
Note:
To remove the MP3 player or the USB memory stick, switch off
the hi-fi system and pull out the cable for the data medium.
Inserting a memory card
The hi-fi system supports MMC and SD memory cards.
Note:
The hi-fi system must be switched off while the memory card is
being inserted. If it is not switched off, data can be lost.
1Insert the card carefully into the »CARD« card slot (under the
flap) until it latches into place.
Note:
Do not use excessive force when inserting the memory card. Only
apply slight pressure.
The memory cards are resistant to dirt and moisture, but may only
be inserted into the hi-fi system in a dry and clean condition.
Never remove memory cards during operation. This can damage
the memory card. This type of damage will invalidate your
warranty.
Removing the memory card
1Switch off the hi-fi system by pressing »ON/OFF«.
2Remove the memory card from the card slot by pressing the card
inwards slightly until the latch is released. Then pull out the card.