Grundig UMS 5800 DEC manual FM 86.45 MHz, Automatic station search ASP, RDS station service

P 05

PROGRAM

FM 86.45 MHz

TUNER MODE ------------------------------------------------------------------------------------

Automatic station search (ASP)

By starting the automatic station search, you can delete all the existing presets and replace them with new ones at the same time.

1To start the automatic station search in tuner mode, press and hold down »PROG./RAND. ¥«.

– After the search has finished, you will hear a stored station.

Note:

The automatic station search can be interrupted by briefly press- ing »7«.

P 02	C
	POP
PROGRAM

)FANTASY MHz

f

¥	C
P 04	POP
PROGRAM

)ENERGY MHz

f

RDS station service

RDS (Radio Data System) is an information system which is transmit- ted additionally by most FM stations.

When the hi-fi system is receiving an RDS channel, the channel name, for example »FANTASY«, and »f« appear in the display.

Note:

It may take some time before all the RDS information is available. GRUNDIG has no influence on the correctness of this informa- tion.

Searching for RDS stations

1To search for an RDS station, press »8« or »9« repeatedly until »f« appears in the display indicating that an RDS station is being received.

–After a short time the station name appears if the reception is sufficiently strong.

RDS time synchronisation

Some RDS stations transmit an RDS time signal (CT). If the se- lected RDS station transmits this time information and the RDS time synchronisation is set to »CT ON« on the hi-fi, then the time is automatically updated (»¥« flashes in the display).

Time synchronisation can take several minutes, and even with good reception the accuracy depends on the time signal being transmitted.

ENGLISH

23