Grundig UMS 5800 DEC manual 1134, 2240, 2316

11:34

THU

§

22:40

FRI

§ WEC

23:16

TUE

e

TIMER MODE----------------------------------------------------------------------------------------

7Press »INTRO/REP. ≈« to finish the settings.

–Display: »§« or »e«, the day of the week and the time.

–The hi-fi system switches on at the set time with the selected signal source (maximum alarm duration 90 minutes).

Note:

The volume of the alarm increases continually from zero onwards until an individually set maximum volume is reached. If you press »– I +« on the hi-fi or »– X+« on the remote control during the alarm in CD, SD/MMC, USB or tuner mode, the volume stops increasing.

Interrupting the alarm

1During the alarm, press »SNOOZE« on the remote control.

–The alarm signal stops.

–The alarm goes off again at five-minute intervals (alarm duration – 90 minutes).

Cancelling the alarm for the day

1Switch the hi-fi system off by pressing »ON/OFF« when the alarm is sounding.

– The switch-on timer remains activated for the next day.

Switching off the alarm for the weekend

You can switch off the alarm function over the weekend. The entered alarm times are saved.

1Switch off the alarm function with »WEC« on the remote control.

–Display: » WEC «.

2Press »WEC« on the remote control to reactivate the alarm func- tion.

–Display: » WEC « disappears.

Activating and deactivating the switch-on timer

1To deactivate the switch-on timer, press »INTRO/REP. ≈« briefly in standby mode.

–Display: »e« or »§« disappear.

–The switch-on timer is deactivated, the set alarm time is stored.

2To activate the switch-on timer, press »INTRO/REP. ≈« briefly in standby mode.

–Display: »e« or »§«.

34