GSI Outdoors VHC, VLC Plenum Thermostat Mounting, Operating Temperature Table, Installation

Deluxe Vane Axial Heater INSTALLATION

Plenum Thermostat

Mounting

The plenum thermostat is the 4 x 4 white box with knob that is preconnected to heater when heater is ordered with thermostat.

1.24" to the right side of the

transition, drill one 3/8" hole (high temp) or 1 1/2" hole (low temp) in the center of the ple- num in a valley (4.00" corru- gation) or hill (2.66" corruga- tion) on bin sidewall.

2.Insert the probe through the hole.

3.Position the housing so that the tabs are vertical, and the cord exits the housing horizontally.

Plenum thermostat mounting on bin wall.

4.Use 4 self drilling screws to mount the housing to the bin sidewall.

5.Caulk between the housing and the sidewall to seal.

THIS TABLE IS NOT INTENDED AS A DRYING GUIDE.

IT SHOULD BE USED AS A REFERENCE FOR SETTING MAXIMUM PLENUM

TEMPERATURE FOR SAFE OPERATION.

Operating Temperature Table

		HIGH-	HIGH-	CONTINUOUS
	LO-TEMP	TEMP	TEMP
				FLOW
	BATCH	BATCH DRY	WITH
				(RECIRCULATING)
		NO STIRRING	STIRRING
					IMPORTANT!
	ABOVE	1200	1400	1600
	5-200
CORN	AMBIENT				DO NOT EXCEED
	TEMP				PLENUM
RICE	5-100			RECOMMENDED	TEMPERATURES
	AMBIENT	1000	1000		LISTED IN TABLE
	ABOVE			NOT
	TEMP
BEANS	5-200
	ABOVE	1100	1200	NOT
&	AMBIENT			RECOMMENDED
WHEAT
	TEMP

13