please read all instructions before using this appliance
WARNING! Do not use the Dirt Cup Handle to move the cleaner.
THERMAL RESET BUTTON:
Operates due to overheating, caused by a full dirt cup, clogged filter or blocked pipes.
Unplug the cleaner and remove the blocked materials. To operate again, after cooling down the cleaner about 30 minutes, press the Thermal Reset Button.
Model | GGU350TT | Cord Length | 32 feet |
Rating | 120V/60Hz | Inner Filter | HEPA Filter |
Amperage | 12 amps | Exhaust Filter | Micron Filter |
Weight (Net) | 20.50 lbs | Headlight | Yes |
Dimensions | 15" x 14" x 45.25" | Belt | Yes |
|
|
|
|
Hose Cradle Assembly
HOSE CRADLE ASSEMBLY
•Set hose cradle on the top of the cleaner. (Fig. 1)
•Using a Phillips screwdriver, secure the
Fig. 1
Main Power | Brush Power |
Switch | Switch |
O | H |
P |
|
W |
|
|
| S |
E | R |
| U | |
R |
| |||
| B |
|
| |
Dirt Cup
Filter
Dirt Cup Handle 
Height
Setting
Height Adjustment
KnobControl
Canister
Release Pedal
Headlight 
Handle | Cord Clip |
Handle Hose Connector
Handle(TOOLS/CANISTER MODE)
Extension
Button
Handle Inlet |
|
Hose Connector |
|
Canister |
|
Handle | Hose Cradle |
| |
| Hose |
|
| Hose Clip |
| Body | Handle Removal |
| Button | |
| Cord |
|
| Storage |
|
| Hooks |
|
|
| Base Hose |
|
| Connector |
|
| (UPRIGHT MODE) |
|
| Handle Release |
|
| Pedal |
Base | Thermal Reset |
|
| Button | Cord |
|
| Plug |
Vacuum Assembly: upright Use
Hose Assembly
HOSE ASSEMBLY
•Insert the body end of the hose into the hose inlet on the top of the cleaner. (Fig. 2)
•Line up circular tab on hose cuff with inner groove. (Fig. 2)
•Connect and twist clockwise to secure proper hose connection. (Fig.3)
•Place hose in hose cradle. (Fig. 4)
•Insert the base end of the hose into the hose inlet on the base of the cleaner. (Fig. 5)
IMPORTANT: Hose must be connected to inlet on base of vacuum to work in the UPRIGHT mode.
|
| Hose |
Fig. 2 | Fig. 3 | Base Hose |
|
| Connector |
Fig. 5
Fig. 4 | Detail of |
Hose Lock |
