MHP TJK Assembly Instructions, MODEL TJK Grill, Carton Contents, Parts, Quantity, Hardware

TJK Assembly Instructions

CARTON CONTENTS

Please check to be sure that all parts are included before proceeding with assembly. Contact your local dealer if any parts are missing.

Note: The grill is partially assembled. The Burner, Spider Guards, Venturis, Ignitor Collector Box and the Stainless Steel Handle are installed. Also, for LP units the Gaslow Regulator and Hose are installed.

MODEL TJK Grill

Parts	Quantity
Top Lid Assembly	1
Bottom Casting (Grill Head)	1
Warming Rack	1
Bottom Grate	1
Stainless Steel Cooking Grids	2	(SearMagic 3)
Control Panel Brackets	2
Heat Shield	1
Grease Cup Holder	1
Control Panel Assembly	1
Valve Control Knobs	2
Ignitor Knob	2
Stainless Steel Side Shelf	2
Side Shelf Bracket	2
Condiment Holder	2
Venturi Tube Cleaning Brush	1
Bag of Briquettes (67 pieces)	1
Meat Probe	1
Forked Grid Cleaning Tool	1	(SearMagic Only)

Hardware	Quantity
Connecting Wire for Ignitor	1
¼-20 x 1½” Rd. Hd. Sltd. Bolt	2
¼-20 x 1¼” Rd. Hd. Sltd. Bolt	4
10-24 x 1¼” Rd. Hd. Bolt	8
¼-20 x ¾” Hex Head Bolt	3
¼-20 x ½” Rd. Hd. Sltd. Bolt	2
10-24 KEP Nut	8
¼-20 KEP Nut	11
Keeper Washer	2
Flat Washer for Ignitor	1
1/8 – 27 Jam Connecting Nut	1
Lid Pivot Pin	2
Hitch Pin for Lid	2

19