Maintenance & Tube Bending
General Maintenance
Sear Magic Grid System Care
For best results, preheat the grill for 10 minutes.
1.Use a brass bristled brush to clean top rungs.
2.Use the supplied “Forked Grid Tool” to clean the valley areas between the main rungs. Simply run the tool back and forth with enough pressure to remove the debris. For heavy
3.If a grid gets a slight bow, lay it on a flat surface and apply pressure to the ached area. This will flat- ten the grid to its original configuration.
Note: Over time the grids may change color slightly. This is normal and will not effect the grids performance or durability.
Stainless Steel Cleaning (TJK, Optimum Console)
Before Cleaning, determine which way the “grain” of the metal runs and always clean with the grain.
NEVER USE STEEL WOOL PADS TO CLEAN STAINLESS STEEL.
1.Routine cleaning is done with a warm soapy water applied with a sponge or soft cloth. Always rinse with clean hot water and wipe dry with a soft cloth. Glass cleaners like Windex also works well.
2.Stubborn stains can be removed with a mild non- scratching abrasive household powder. Add a small amount of vinegar to the scouring powder to increase its potency.
3.Commercial stainless steel cleaners and polishers also work well, such as MHP’s Stainless Steel Cleaner (Part #SSC).
Note: Over time the stainless steel will turn a mild gold patina from the grill’s heat. This is normal.
FLEXIBLE STAINLESS STEEL GAS TUBE BENDING
26
