Gas & LP Tank Connections
GAS & LP CYLINDER
Check Local Codes
Consult your local LP dealer or Natural Gas Company for recommended installation procedures and regula- tions. In the absence of local codes, installation must conform to the National Fuel Gas Code, ANSI Z223.1 or
Natural Gas Models
The grill is designed to operate on Natural Gas at a pressure of 7” water column (W.C.) [1.75 kPa]. Check with your gas utility for local gas pressure. Use of your gas grill at pressures other than approximate 7” WC could affect the performance of your grill.
Natural Gas Hose & Inspection
A single hose of not more than 12 feet long (3.6 me- ters) is supplied with the
•Check the hose before each use at places where there could be extra bending, such as near the gas supply
•To replace the hose, turn off gas supply at valve. Release the
•Replace only with an identical hose from the manu- facturer or an authorized dealer. Do not use pipe joint compound on the flared fitting at the con- trol panel grill valve connection.
LP Gas Models
The Grill using a Type I LP cylinder includes the Gaslow Regulator that incorporates an industry exclu- sive Leak Detector and Fuel Supply Indicator. Any replacement pressure regulator or hose assembly must meet or exceed the specifications of the Gaslow Regulator.
DO NOT CONNECT THE GRILL TO AN LP GAS CYLINDER GREATER THAN 20 LB. CAPACITY.
LP Gas Cylinder Requirements: (The
•The LP cylinder should be equipped with an OPD (Overflow Prevention Device) and a QCC! Or Type 1 (CGA810) cylinder connection. This cylinder con- nection is compatible with the grill connection. OPD is an internal mechanical device that limits the amount of liquid propane and prevents overfilling the LP cylinder. The correct filling methods for the filling of your cylinder are by weight or volume, as described in NFPA 58. Please make sure your LP dealer fills your LP cylinder by weight or volume. Ask your LP dealer to read purging and filling in- structions on the LP cylinder before attempting to fill.
•All LP cylinders supply systems must include a col- lar to protect the cylinder valve.
•The LP cylinder must be a
•The LP cylinder must be constructed and marked in accordance with the specifications for
•Be sure your LP cylinder has a D.O.T. certification and has been tested within five years. This infor- mation is usually marked on the protective collar.
WARNING: If you use an LP tank exchange service, be sure that the exchanged tank is equipped with an OPD. If there is not an LP tank available for exchange equipped with an OPD, we recommend that you have your LP tank filled by an authorized LP dealer.
DANGER
Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the immediate area while you check for leaks. Sparks or flames will result in a fire or explosion which can cause serious bodily injury or death, and damage to property.
21
