Upright Mode: Tool Usage
tool usage
1.Turn brush OFF.
2.Remove hose from base hose connector on the lower portion of the cleaner. (Fig. 12)
3.Remove handle from cleaner: Push handle removal button and pull up on handle to disconnect from body. (Fig. 13)
4.Insert hose into handle hose connector and twist clockwise to lock in position. (Fig. 14)
5.Push button on wand to extend telescoping wand. (Fig. 15)
6. Select the tool needed for | cleaning and | attach to end of | wand. | |
|
| Hose | Handle Hose |
|
|
|
| Connector | Handle |
|
|
|
| |
| Handle |
| Telescoping |
|
|
|
| Button |
|
|
|
|
| Hard Floor |
| Handle |
| Handle | Nozzle |
Hose |
|
| ||
Removal |
|
|
| |
| Button |
|
|
|
Base Hose |
|
|
|
|
Connector |
|
|
|
|
Fig. 12 | Fig. 13 | Fig. 14 | Fig. 15 |
converting to canister mode
converting to canister mode
1.Remove hose from base hose connector. (Fig. 16)
2.Step on Canister Release Pedal and pull body upward by canister handle. (Fig. 17)
3.Follow steps
4.Insert end of handle into hard floor nozzle.
5.Canister mode.
Canister
Handle
Body
Hose
Canister Release
Base HosePedal
Connector
| Base |
Fig. 16 | Fig. 17 |
Important:
Storing in Upright mode
•After using the vacuum, store in upright mode.
•Store accessories on the storage clips located on the vacuum body.
•Wrap the cord around the cord storage hooks on the side of the body and hang the plug at the cord clip on the wand. (Fig. 18)
Cord Clip
Cord | Plug |
|
Fig. 18
| When returning to UPRIGHT mode hose MUST be removed |
|
from handle and returned to inlet on body. | ||
|