MAINTENANCE

·Always unplug the unit before servicing it in any way.

·The water temperature of the water remaining in the unit after use may be high.

·Do not submerse the unit in water, or allow water to enter the inside of the unit or humidity spout. Only put water into the water tank.

INSIDE THE BODY OF THE UNIT

Pour excess water out of the unit, but do not allow it to enter the blast port. Wash out the unit with fresh water, using the cleaning brush and a soft cloth as needed.

OUTER SURFACE OF THE UNIT

Wipe the surface of the unit with a soft damp cloth if needed.

WATER TANK

If water spots remain in the water tank, wipe the inside down with a soft cloth. Do not use soap or detergents.

AIR FILTER

Gently wipe away debris from the filter with a soft cloth.

ULTRASONIC DISK

Remove water tank (Fig. 1) and use the enclosed cleaning brush to regularly remove build up and deposits from this area. (Fig. 2) Diluted white vinegar will help to prevent this build up.

*Clean the disk with the brush only. No other cleaning tool should be used. Brush only. (Fig. 2)

Fig. 1

Fig. 2

STORAGE

·Fully dry the inside and outside of the unit before storing it.

·DO NOT leave water in the unit.

·Store in a cool dry place.

TROUBLESHOOTING GUIDE

PROBLEM

SOLUTION

 

 

Water mist & humidity are not

Power Plug: Unplug and then try again.

produced.

Power Failure: When the power is returned, try again.

 

 

Water Tank Installation: Make sure the water tank is

 

correctly attached. Make sure spring on tank cap moves

 

freely when pushed.

 

 

Air blows but water mist is

Excessive Water: Remove water tank. Empty a small

not produced.

amount of water from the base of the unit.

 

The desired humidity is lower than the current

 

temperature: increase the desired humidity.

 

Detergent residue in the water tank: Wash the water tank

 

out and try again.

 

 

Humidity level is low.

The surface of the ultrasonic disk is dirty. Clean with

white vinegar.

 

 

The water in the unit is too cold: Replace with cool, but

 

not cold water.

 

The ultrasonic disk is damaged contact customer service

 

at 866-603-5900.

 

 

Warm humidity is not produced.

It may take 10-15 min. before warm humidity is created.

 

 

The mist may not feel warm to the touch. Check to see

 

if base of unit feels warm to the touch. If so then warm

 

mist is being produced.

 

 

The humidity has a bad smell.

Poor maintenance or dirty water: Clean the product

 

thoroughly, and fill it with fresh water.

 

 

White dust is forming on nearby

Hard water may deposit a certain amount of dust. Dust in

furniture.

the air also settles because of added humidity in the room.

 

*Use distilled water if this becomes a nuisance.

 

Or order a Decalcification Filter (FLTDC)

 

by calling 1-866-603-5900 or visiting

 

www.guardiantechnologies.com

 

 

6

7

Page 4
Image 4
Guardian Technologies R2000 warranty Maintenance, Storage, Troubleshooting Guide

R2000 specifications

Guardian Technologies R2000 is a state-of-the-art air purification device that has gained attention for its ability to create a cleaner and healthier indoor environment. Designed to combat airborne pollutants and allergens, the R2000 incorporates cutting-edge technology to provide users with effective air purification solutions in various settings, including homes, offices, and other indoor spaces.

At the heart of the R2000 is its advanced filtration system. The device utilizes a multi-stage filtration process that includes a HEPA filter capable of capturing 99.97% of particles as small as 0.3 microns. This feature is particularly beneficial in reducing allergens such as dust mites, pollen, mold spores, and pet dander, making it an excellent choice for allergy sufferers. Another important component of the filtration system is the activated carbon filter, which effectively reduces odors and volatile organic compounds (VOCs) found in household items, cleaning agents, and other sources.

One of the standout features of the Guardian Technologies R2000 is its innovative UV-C light technology. This technology works in conjunction with the filtration system to help kill airborne viruses and bacteria. The combination of HEPA filtration and UV-C light provides a comprehensive approach to air purification, ensuring that not only are particulate pollutants removed, but harmful microorganisms are also treated.

The R2000 is designed with user convenience in mind. It boasts a sleek and modern aesthetic, making it an attractive addition to any room. The device is equipped with smart sensors that monitor air quality and adjust the fan speed automatically to optimize performance. Additionally, the R2000 offers multiple fan speeds, allowing users to customize their air purification experience based on their specific needs.

Another significant characteristic of the R2000 is its quiet operation. Thanks to its advanced engineering, the device operates at a low noise level, making it suitable for use in bedrooms, nurseries, and workplaces without causing disturbances.

In conclusion, the Guardian Technologies R2000 is an exemplary air purifier that effectively addresses various indoor air quality concerns. With its powerful HEPA and activated carbon filters, innovative UV-C technology, and user-friendly features, the R2000 represents a solid investment for anyone looking to enhance their living or working space with cleaner air. Whether for allergy relief or general health benefits, the Guardian Technologies R2000 stands out as a reliable air purification solution.