Assembly Instructions
WARNING! Do NOT plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury.
1. Slide wands together until Wand
wand button 1 snaps into | 1 |
| |
place. Turn wand | Fig. A |
button 1 to the slotted | |
area of the wand swivel. |
|
(Fig. A) The swivel allows you to turn the handle to the left side to reach under low furniture.
2.Insert connected wands into the EG1400 until the wand button 2 snaps into place.
3.Secure cord into the cord holder on wand swivel.
4. Connect EG1400 plugFig. B into the plug holder. (Fig.
B) Do NOT force.
5. Insert the hose handle
into the wand until the |
| |
lock button snaps into |
| |
place. (Fig. C) Be | Fig. C | |
sure the hose is not | ||
| ||
twisted. To remove: |
| |
Press handle release |
| |
button and pull up on |
| |
handle. |
|
To remove wands: Step on wand quick release pedal, then pull up on wands.
6.Insert the hose wall adapter into the vacuum inlet valve. Plug the 120V cord into the nearest electrical outlet if hose is equipped with a pigtail.
1
Cord
Holder
2
