Maintenance and Care
WARNING!!! Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. Always follow all safety precautions specified when caring for your EG1400.
Belt Changing & Agitator Cleaning
Disconnect hose and brush from electrical outlet. Frequently check and remove hair, string and lint buildup in the agitator and support areas. If buildup becomes excessive, disconnect the EG1400 from the wand and follow the steps below.
To Remove Belt
1.Turn EG1400 upside down and unscrew the 2 cover screws. (Fig. H)
2.Turn EG1400 right side up. Press handle release pedal and lower the swivel. Lift rear latches up. (Fig. I)
3.To remove cover, grasp the side and pull out.
4.Depress tabs on rear of agitator cover and rotate forward to release from the EG1400 base. (Fig. J)
Fig. H
Fig. I
Fig. J
5. Lift agitator assembly out and remove worn | Fig. K |
| |
belt. (Fig. K) |
|
6. Check and clean end cap areas.
