Using Your QuickPro™ Portable Steamer & Sanitizer
Fig 7
raised ridges
Fig 8
clip tabs
Fig 9
Brush
Bristles
Textured
surface
Fig 10
Use
Brush
Bristles &
steam to
loosen
stain
Operating Instructions: (cont)
•rain water
•boiled, filtered or bottled water
•water from refrigerators, batteries or air conditioners
•use distilled or demineralized water only as advised on page 7.
Using the Combination Lint/Nap Brush Accessory Attachment:
1)Before plugging the appliance in and while the Steam Plate is cool, attach the Combination Lint/Nap Brush Accessory by snapping it onto the Steam Plate.
2)On the both sides of the QuickPro™ you will see two (2) raised ridges near the Steam Plate (Fig 7). These correspond to the clip tabs on the accessory (Fig 8).
3)Push the Combination Lint/Nap Brush Accessory onto the Steam Plate until the clip tabs snap securely onto the ridges. This allows the Steam Jets clear access to help freshen the fabric (Fig 9).
4)Plug in the QuickPro™, wait for the Indicator light to turn Red and then use the appliance as described in Step 10 of the previous section. Use the textured surface of the accessory to remove hair, dust or lint from garment surfaces as you steam. The brush bristles can be used to freshen and lift the nap on the fabric as you sanitize the surface.
5)The QuickPro™ can be used to remove most fresh, wet spills and stains from fabrics. Hold the Steam Plate over the fresh stain and use the steam jets to penetrate the area. Use the Brush bristles to rub the saturated area gently. Take an absorbent towel and blot the area. Repeat as necessary until the stain is lifted.
6)When finished using the QuickPro™, unplug the unit and allow the appliance to cool completely while on the Metal Resting Tray. Remove the accessory attachment; it will snap off easily. Empty any residual water in the reservoir before storing the unit.
w w w. H A A N USA . com | 877 - HAAN DIRECT / 877 - 422 - 6347 | pg 9 |
