Hafler Performance Specifications, TRM10.1 Dimensions, TRM12.1 Dimensions, Subwoofer, Model

PERFORMANCE SPECIFICATIONS

SUBWOOFER	TRM10.1
MODEL
Free Field Frequency Response	27Hz–110Hz, ±2dB
Peak Acoustic Output	≥112dB (w/music @ 2m)
Total Harmonic Distortion (THD) <3%, 30Hz–90Hz (90dB @ 2m)
Low Frequency Driver	10" (254mm) Cellulose Fibre Cone
	Santoprene Rubber Surround
	2" (51mm) 4-Layer Voice Coil
	30 oz. Magnet
Cabinet	1.0ft3 (28 Liter) Vented Down Firing
Dimensions	14.75"(H) x 16"(W) x 16"(D)
	(37.46cm x 40.64cm x 40.64cm)
Net Weight	53 lbs. (24kg)

Frequency Response @ 2m*

TRM12.1

25Hz–110Hz, ±2dB

≥115dB (w/music @ 2m)

<3%, 25Hz–90Hz (90dB @ 2m) 12" (305mm) Cellulose Fibre Cone Santoprene Rubber Surround 2.5" (63.5mm) 4-Layer Voice Coil 102 oz. Magnet

2.0ft3 (56 Liter) Vented Down Firing 18.25"(H) x 19.50"(W) x 19.375"(D) (46.35cm x 49.53cm x 49.21cm)

94 lbs. (42kg)

Frequency Response @ 2m*

AMPLIFIER SECTION

*Frequency response generated with 60Hz low pass crossover engaged

Power Rating

Signal-to-Noise

CMRR

Input Impedance

Input Sensitivity Range

Gain

Power Consumption

Maximum Input

Rear Panel

LOW-PASS CROSSOVER SECTION

Crossover Frequency

Crossover Slope

Subsonic Filter

200 W RMS @ 4 ohms >100dB

>70dB typical @ 60Hz

47kΩ per phase balanced, 47kΩ unbalanced 160mV to 5V (RCA in)

+45dB max. to +15dB min.

Idle Power: 11W / 150mA @ 120 VAC

Normal Operation: 68W / 770mA @ 120 VAC

Full Power: 330W / 3.3A @ 120VAC

Idle Power: 11W / 90mA @ 230 VAC

Normal Operation: 66W / 380mA @ 230VAC

Full Power: 315W / 1.7mA @ 230VAC Balanced XLR Inputs

Unbalanced RCA Inputs Gain Control (30dB range)

Low Pass Crossover (variable 40Hz–140Hz) Phase DIP Switches (0°, -90°, -180°, -270°)

Variable from 40Hz–140Hz 24dB/octave (4th order) Linkwitz-Riley 12dB/octave (-3dB @ 18Hz)

TRM10.1 Dimensions

H = 14.75"

D = 16"

W

16"

TRM12.1 Dimensions

H = 18.25"

D = 19.375"

W

19.50"

Specifications are subject to change without notice.

– vi –