Haier AD36NS1ERA, AD24MS1ERA, AD28NS1ERA, AD48NS1ERA operation manual Timing setting, Cancel timing

Operation

Timing setting

OFF timing: when a set time has elapsed, the unit stops running.
ON timing: when a set time has elapsed, the unit starts.									Press "ON/OFF" switch firstly,
									and set up operation mode.
									Please regulate the clock in
									advance before using the
			MODE	FAN	SWING				timing function.
MODE	FAN
	HIGH	OPERATION	HEALTH	TEMP		1.Press "TIME" switch.
COOL
						The display changes with the following sequence:
			CLOCK	TIME		ON	OFF	on	on	CYCLE	no display
								OFF	OFF
		ROOM TEMP.	TIMER	SET RECOVERY
						2.Set up "TIMER"
TIMER						When timing ON or timing OFF flickers, press " " or " " to
ON
			CHECK	FILTER		regulate the time
					RESET
						Press" "or " "set up ON/OFF time.
						The setting time increases ten minutes each time you press " "
						switch.
			ON/OFF			The setting time decreases ten minutes each time you press " "
						switch.
						When setting timing ON and timing OFF at the same time,
			1	3	2	press "timing" switch to change the setting item.
						3.Time setting is achieved. Press"setting"switch.

Cancel timing

If you want to change the timing mode to normal operation, press "timing" until there is no timing display. When the timing is invalid, the mode is in normal operation.

parts of wired controller explanation :

1.The unit starts or stops at the setting time. Meanwhile, it displays the timing time.

2."ON Timing, OFF timing and circulation"means that the unit is on and off at the setting time everyday.

Notes

The shorter setting time will be carried out firstly.

If the ON timing and OFF timing are the same, the setting is invalid.

Even in timing condition, you may start or close the unit through pressing "ON/OFF" switch.

12