Haier AS09SB1HRA/1U09QE6ERA Press TEMP.setting Press Temp button, 1Up and down air flow direction

Operation

Select TEMP.setting FAN Operation SWING Operation

AM

1 Press TEMP.setting

Press TEMP button.

Every time the button is pressed, temp. setting increases 0.5oC.

Every time the button is pressed, temp. setting decreases 0.5 oC.

AM

1Up and down air flow direction

For each press of “ ” button, air flow direction on remote controller displays as follows according to different operation modes:

SMART

Unit will start running to reach the temp.setting on LCD.

SMART

COOL/DRY:

HEAT:

SMART:

Initial state

2FAN Operation

2 Left and right air flow direction

Press FAN SPEED button. For each press, fan speed changes as follows:

LOW MED HI AUTO

Unit will run at selected fan speed.

For each press of “ ” buttor,remote controller displays as follows:

remote controller:

Initial state

When humidity is high,condensate water might occur at air outlet if all vertical louvers are adjusted to left or right. It is advisable not to keep horizontal flap at downward position for a long time in COOLor DRY mode , otherwise, condensate water might occur.

As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more helpful for a

better air circulation.

4