Emergency operation and test operation

Pi
Pi Pi
Operation

Emergency Operation:

the room
temperature is below 16 C, do
o

Test operation:

Use this switch in the test operation when
It is not possible to operate in dry mode.
Room
temperature Operation
mode Designated
temperature Timer
mode Air flow
ABOVE 23OC
BELOW 23 C
COOLING
HEAT 23 OC
26 OCNO
NO
AUTOMATIC
AUTOMATIC
(cooling only uint)
Room Operation
mode
Designated
temperature
Timer
mode Air flow
BELOW 23 OCFAN 26 OCNO AUTOMATIC
Test operation switch is the same as
Use this operation only when the remote
controller is defective or lost.
When the emergency operation switch
is pressed,the"Pi" sound is heard once,
In this operation,the system automatically selects the
operation modes,cooling tor fan or heat, according to
Continue to press the test operation switch for more than
5 seconds. After you hear the
"Pi" sound twice,release
your finger from the switch:the cooling operation starts
O

Air Filter cleaning

Clean the filter
Attach the filter
Close the inlet grille
Once every
two weeks
Open the inlet grille by pulling
Remove the filter
Push up the filter’s center tab slightly until it is
released from the stopper, and remove the filter
Use a vacuum cleaner to remove dust, or wash
the filter with water. After washing, dry the filter

For smart Use of The Air Conditioner

temperature
which means the start of this operation.
the room temperature.
emergency switch.
not use it in the normal operation.
with the air flow speed
"Hi".
downward.
completely in the shade.
it upward
Attach the filter correctly so that the
“FRONT” indication is facing to the
completely fixed behind the stopper.
If the right and left filters are not
front. Make sure that the filter is
attached correctly, that may cause defects.
9