Operation
COOL, HEAT and DRY operation
Recommendations: | Use COOL in summer. |
Use HEAT in winter.
Use DRY in spring, autumn and in damp climate.
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display. (Not Timer setting) Power indicator on indoor unit lights up.
(2) Select operation mode
AUTO
AM
Press MODE button. For each press, operation
AUT COOL DR HEA FA
Unit will run in operation mode displayed on LCD.
(3) Select temp.setting
TEMP
3
5 SWING | ON |
OFF 1 FAN 4 | |
6 |
|
MODE | SLEEP |
2 CLOCK | SET |
TIMER |
|
Press TEMP. button
LOCK RESET
Every time the button is pressed, temp. setting increases 1oC Every time the button is pressed, temp. setting decreases 1oC
Unit will start running to reach the temp. setting on
(4) Fan speed selection
Press FAN button. For each press, fan speed changes
LO | MED | HI | AUT |
|
|
| AUT |
Unit runs at the speed displayed on LCD.
In HEAT mode, warm air will blow out after a short period of time due to
In DRY mode, when room temp. becomes 2oC higher than temp. setting, unit will run intermittently at LO speed regardless of FAN setting.
COOL operation starts when room |
|
temp. is higher than temp. setting. | |
|
Temp. setting+2oC
Temp.
On reaching temp. setting,unit will run in mild DRY mode.
Hints
Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.
On cooling only unit, heating mode is not available.