Haier AU072ABBAA, AU072ABNAA manual 2TIMER mode selection, 3Timer setting, 4Confirming your setting

Operation

TIMER operation

Set Clock correctly before starting Timer operation(referring to page 6)

You can let unit start or stop automatically at following times: Before you wake up in the

TIMER ON/OFF

(1)After unit start, select your desire operation mode. Operation mode will be displayed on LCD.

Power indicator on indoor unit lights up.

(2)TIMER mode selection

Press TIMER button to change TIMER mode.

Every time the button is pressed, display changes as

	ON		OFF	ON	OFF	blan
TIMER ON		TIMER OFF		TIMER ON-OFF

Select your desired TIMER mode (TIMER ON or TIMER OFF) ON or OFF will flash.

(3)Timer setting

Press HOUR

Every time the button is pressed, time increases 10 min. If button is kept depressed, time will change quickly.

Every time the button is pressed, time decreases 10 min. If button is kept depressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24 hours.

(4)Confirming your setting

After setting correct time, press SET button to confirm, "ON" or "OFF" stops flashing.

Time displayed: Unit starts or stops at x hour x min. (TIMER ON or TIMER OFF).

Timer mode indicator on indoor unit lights up.

To cancel TIMER mode

Just press TIMER button several times until TIMER mode

Hints

AM

ON

AM

TEMP

ON

SWING OFF 1 FAN

MODE SLEEP

CLOCK SET

TIMER 4

2 3

LOCK RESET

After replacing batteries or a power failure happens, Time setting should be reset. Remote controller possesses memory function, when use TIMER mode next time, just