INSTALLATION MANUAL FOR OUTDOOR UNIT

<Heat Pump model/Cooling Only model >

WARNING

BE SURE TO READ THESE INSTRUCTIONS CAREFULLY BEFORE BEGINNING INSTALLATION. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD CAUSE SERIOUS INJURY OR DEATH, EQUIPMENT MALFUNCTION AND/OR PROPERTY DAMAGE. BE SURE TO READ INSTALLATION MANUAL FOR INDOOR UNIT WITH THIS MANUAL.

1. Accessories

Edging

"Edging" for protection of electric wires from an opening edge.

2. Selection of the place of installation

Select the place of installation satisfying the following conditions and, at the same time, obtain a consent from the client or user.

Place where air circulates.

Place free from heat radiation from other heat sources.

Place where drain water may be discharged.

Place where noise and hot air may not disturb the neighborhood.

Place where there is not heavy snowfall in the winter time.

Place where obstacles do not exist near the air inlet and air outlet .

Place where the air outlet may not be exposed to a strong wind.

Place surrounded at four sides are not suitable for installation. A 1m or more of overhead space is needed for the unit.

Mount guide-louvers to place where short-circuit is a possibility.

When installing several units, secure sufficient suction space to avoid short circuiting.

(1) Open space requirement around the unit

Unit: mm

L2

Air inlet

Air inlet L3

500

(Servicing

space)

Air outlet

L1

Distance

Case

I

II

III

 

L1

 

open

open

500

 

 

 

 

 

L2

 

300

0

open

 

 

 

 

 

L3

 

150

300

150

 

 

 

 

 

(2) Installation where the area with strong winds.

Install the unit so that the air outlet section of the unit must NOT be faced toward wind direction.

3. Installation of outdoor unit

NO

(1) Installation

Fix the unit in a proper way according to the condition of a place where it is installed by referring to the following .

(a) Concrete foundation

Unit

Anchor bolt

Concrete foundation

To fix by bolts

Note (1) Give enough room for the concrete foundation to fix by anchor bolts.

Foundation anchor

Unit

Concrete foundation

Anchor bolt

Note (1) Place the concrete foundation deep enough.

Install the unit so that the angle of inclination must be less than 3 degrees.

12

Page 13
Image 13
Haier AU122AABHA, AU092AABHA Open space requirement around the unit, Installation where the area with strong winds

HDU-12HA03/M(R1)(B), HDU-09HA03/M(R1)(B), AD092AMBHA, AD122AMBHA, AU122AABHA specifications

Haier, a global leader in home appliances, has consistently pushed the boundaries of innovation and efficiency in air conditioning systems. Among its impressive lineup are the Haier HDU-09HA03/M(R1)(B), HDU-12HA03/M(R1)(B), AD092AMBHA, AU092AABHA, and AD122AMBHA models. These air conditioning units not only offer comfort but also incorporate advanced technologies and characteristics that enhance user experience.

The Haier HDU-09HA03/M(R1)(B) and HDU-12HA03/M(R1)(B) are split air conditioning systems known for their efficient cooling and heating capabilities. They feature high energy efficiency ratings thanks to their inverter technology, which adjusts the compressor's speed based on the cooling demand, resulting in lower power consumption and cost savings. The units are designed with a sleek and modern aesthetic, making them a perfect fit for various interior decors.

The AD092AMBHA and AU092AABHA models stand out for their compact design and powerful performance. These systems are equipped with smart features like Wi-Fi connectivity, allowing users to control their air conditioning remotely via a mobile app. This feature provides convenience and flexibility, enabling users to adjust settings before arriving home. Additionally, these models boast self-cleaning functions and advanced filtration systems that enhance indoor air quality by removing dust and allergens.

The AD122AMBHA model is designed for larger spaces, offering robust cooling and heating efficiency. It employs a high-performance compressor and enhanced airflow technology, ensuring consistent temperature control. Furthermore, its operation is quiet, making it an ideal choice for residential and commercial environments where noise can be a concern.

All these Haier models share a commitment to sustainability and environmental responsibility. They utilize eco-friendly refrigerants that minimize ozone depletion and are compliant with the latest environmental regulations. Moreover, the energy efficiency of these units significantly lowers carbon emissions, aligning with global efforts toward sustainability.

In summary, Haier's HDU-09HA03/M(R1)(B), HDU-12HA03/M(R1)(B), AD092AMBHA, AU092AABHA, and AD122AMBHA air conditioning models are exemplary products that combine cutting-edge technology, energy efficiency, and user convenience. With features like inverter technology, Wi-Fi control, and enhanced air quality functions, these models cater to diverse consumer needs while contributing to a more sustainable future.