Haier (6) Unit stop, (5) Air flow direction adjustment, Cautions: Cautions: Cautions:, Left and right air flow adjustment (manual), Up and down (Use remote controller)

Operation
9
It is advisable not to keep vertical flap at
downward position for a long time in COOL
or DRY mode, otherwise, condensate 
water might occur.
When humidity is high, condensate water
might occur at air outlet if all horizontal 
louvers are adjusted to left or right.
Unit won't restart until 3 minutes have
elapsed, due to system protection.
(6) Unit stop
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more 
helpful for a better air circulation.
Be careful not to catch a cold when cold air blows downward.
It is harmful to your health in summer to go frequently in and out of places where temp.
difference is above 7oC. Temp. difference of 3-5oC will remove your fatigue.
More than this, unit's load can be reduced and power consumption cut down as well. So, you'd 
better set a temp. diff of 3-5oC between indoor and outdoor temp. in COOL mode.
(5) Air flow direction adjustment
After operation mode is selected, vertical flap will open automatically according to the mode.
Referring to the Fig.
COOL
Cautions: Cautions:
Cautions:
Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closes automatically.
Hints
Level
About 10o
Left and right air flow adjustment
(manual)
Press SWING button, vertical flap will move within
the range shown in the Fig. Press SWING button
stop it at a fixed position.
Move the horizontal blade by a knob on air
conditioner to adjust left and right direction
referring to Fig.
About 10o
About 45o
Up and down (Use remote controller)
COOL