Haier Emergency operation and test operation

Operation
13
Emergency Operation:
Carry out this operation only when the remote controller is defective or lost.
When the emergency operation switch is pressed, a " Pi " sound starts once, which
means the start of this operation.
In this operation, it is not possible to change the 
settings of temperature and air flow speed, it is 
also impossible to do an operation by the timer.
Follow the requirements below.
Designated 
temperature Timer  mode Air flow speed
Operation
mode
AUTO
If an air conditioner is a model cooling .
Cooling when the room temperature at the start of operation is above 23
o
C.
Test operation:
Use this switch in the test operation when the room
temperature is less 16 C, do not use it in the normal
operation.
Continue to press the test operation switch for more
than 5 seconds. After you hear the "Pi" sound twice,
release your finger from the switch, the cooling 
operation starts with the air flow speed setting "Hi".
Removal of the restriction of emergency or test operation:
Press once more the emergency operation switch, or manipulate through the remote
controller, a "Pi" sound causes the restriction of emergency or test operation to be
removed.
When the remote controller is manipulated for the removal, then the selected operation
by the remote controller.
Emergency operation and test operation
Room 
temperature
More than 23
o
C26
o
C
CONTINUOUS COOL
"Pi"! Pi"!
"Pi"!