Haier AU122ABNCA, AU092ABNCA 2TIMER mode selection, 3Timer setting, 4Confirming your setting

Operation

TIMER operation

Set Clock correctly before starting Timer operation(referring to page 5)

You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night.

TIMER ON/OFF

(1)After unit start, select your desired operation mode. Operation mode will be displayed on LCD.

Power indicator on indoor unit lights up.

(2)TIMER mode selection

Press TIMER button to change TIMER mode.

Every time the button is pressed, display changes as follows:

	ON		OFF	ON	OFF	blank
TIMER ON		TIMER OFF		TIMER ON-OFF

Select your desired TIMER mode (TIMER ON or TIMER OFF) ON or OFF will flash.

A

TEMP

ON

OFF 1

SWING FAN

MODESLEEP

(3)Timer setting

Press HOUR button.

Every time the button is pressed, time increases 10 min. If button is kept depressed, time will change quickly.

Every time the button is pressed, time decreases 10 min. If button is kept depressed, time will change quickly. Time will be shown on LCD. It can be adjusted within 24 hours.

(4)Confirming your setting

CLOCKSET

TIMER 4

23

LOCK

RESET CODE

After setting correct time, press SET button to confirm, "ON" or "OFF" stops flashing

Time displayed: Unit starts or stops at x hour x min. (TIMER ON or TIMER OFF).

Timer mode indicator on indoor unit lights up.

To cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

Hints

After replacing batteries or a power failure happens, Time setting should be reset. Remote controller possesses memory function, when use TIMER mode next time, just press SET button after mode selecting if timer setting is the same as previous one.

10