Installation procedureInstall indoor unit
1.Choose installation place
The chosen installation place should meet the following requirements and | ||
get the userís consent. |
|
|
Place air can freely circulate. |
| >30cm |
|
| |
Place can perform level installation. |
|
|
The condensate water can be drained smoothly. |
|
|
Place where the noise and hot air will not |
|
|
disturb the neighbors. | >10cm |
|
Place can ensure the space for successful | >10cm | >15cm |
maintenance and repair. |
| >60cm |
|
|
Place where the four corners of the unit are easily installed and leaves at least 1m height space.
Place where the wall hole is easy for drainage.
When installing multiple units, make sure to leave enough space to avoid air
If the outdoor unit near the street, it should not be lower than 2.5m.
Please install in the place that can sufficiently bear the weight of the unit. The air conditioner cannot install on a
Install in the place with intensity as high as possible to prevent the noise and vibration from spreading to other places.
Avoid the place where the strong airflow directly toward the air inlet or air outlet.
Avoid the place where high frequency electromagnetic waves are generated to prevent the communication of indoor and outdoor from being affected.
Avoid the place where the combustible gas exists. The combustible gas around the air conditioner may cause fire.
Avoid the place where the combustible gas may be leaked. If the leaked gas gathers around the air conditioner, it may cause fire accident.
Avoid the place with to much oil, vapor and salinity, such as, seashore and hotspring area and the area with sulfurated gas, etc. corrosive gas.
If install in these places, the air conditioner needs special maintenance. Avoid the place where the heat source directly radiates or with other heat sources.
3