Haier DW-40W380, DW-40W255, DW-40W100 manual Because the alarming parameter is

Because the alarming parameter is

Comparaed the setvalue(SA) needed inside the storage,the hige temperature alarm temperature=SA+AH; the low temperature Alarm temperature=SA

-AL.If the setvalue is -25 to-15 someone want to change the hige temperature alarm temperature from -20 to -15 and thelow temperature alarm temperature from -30 to 35 Please follow the steps below:

		The present temperature
		inside the storage
		Display “PS” and flash
Or	(down) key	Until display “AH”
the
		10
the
		Until display “AL”
the
		10
the		AH
the	for more than	The present temperature
5 seconds to access the Parame
		inside the storage
-ter

0