EN
Inspect the nozzles in the spray arms for blocked holes
due to remnants of food.
If necessary, pull the lower arm “ 10 ” upwards and lift it off.
Unscrew the upper spray arm “ 9 ”.
Clean both spray arms under running water.
Refit the spray arms. Ensure that the lower arm has locked
into place and the upper one is screwed tight.
Ensure that the power supply is turned off prior to removal
and cleaning of any internal pars.

Spray arms

Lime and remnants of food in the washing water can block the
nozzles in the spray arms “ 9 ” and “ 10 ” and the arm mountings.
9
10

Resolving minor problems yourself

Experience has shown that you can resolve most problems that rise during normal daily usage yourself,
without having to call out a service engineer.Not only does this save costs,but it also means that the
appliance is available for use again that much sooner. The following list of common occurrences and
their remedies should help you identify the causes of most problems.

...when the appliance is switched on

Appliance does not start up

Trouble Shooting
Fault with fuse in mains electricity supply.
Plug not inserted in wall socket.
Appliance door not closed properly.
The ON/OFF button has not been pressed.
The program selector knob has not been turned to RESET and back to the selected program.
Approximately 30 seconds has not elapsed since door shut, power on and program selector rotated.
Water tap not turned on.
Blocked strainer in water intake hose.
- The strainer is situated in the Aquastop or supply-hose connection.

Problems...

20