How to fill the salt
Salt
The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils.
The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
Loading the salt into the container
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should be filled as follows:
For DW15-PFE1**
According to the “Water Hardness Tabel”, you can calcu- late the time of use , then load the salt .
Remove the lower rack and then unscrew and remove the cap from the salt container.
If you are filling the container for the first time, fill it with water.
Place the end of the funnel (supplied) into the hole and introduce about 2 kg of salt. It is normal for a small amount of water to come out of the salt container.
Carefully screw the cap back on.
For DW15-PFE2**
When the low salt indicator “1” lights, you must fill the salt. |
|
Remove the lower rack and then unscrew and remove |
|
the cap from the salt container; |
|
If you are filling the container for the first time, fill it with |
|
water; |
|
Place the end of the funnel (supplied) into the hole and |
|
introduce about 2 kg of salt. It is normal for a small amount |
|
of water to come out of the salt container. | 1 |
Carefully screw the cap back on. |
|
Important
To prevent the formation of rust, load the salt just before beginning a
wash cycle.
9
