How to fill rinse aid
Rinse aid
This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door .
For
When the low rinse aid indicator “2 ” is bright ,it means the rinse aid is low,you must load rinse aid .
2
Low
Full
For
When the low rinse aid indicator “H ” lights , you must load
rinse aid .
H
Loading the rinse aid
Regardless of the type of detergent dispenser installed on |
|
| |
your appliance, you must proceed as indicated below when |
|
| |
loading the rinse aid. |
|
| |
To open the dispenser, turn the "3" cap in an | 3 |
| |
direction and then pour in the rinse aid, making sure not to |
| ||
4 | |||
overfill. The amount of rinse aid used for each cycle can be | |||
|
| ||
regulated by turning the " 4" dose adjustor, located beneath |
|
| |
|
| ||
the "3" cap, with a screwdriver. There are 6 different settings; |
|
| |
the normal dosage setting is 3. |
|
| |
|
|
| |
Important
Proper dosage of the rinse aid improves drying.
If drops of water remain on the dishes or spotting occurs, the dosage adjus- tor should be turned to a higher setting.
If the dishes have white streaks, turn the dosage adjustor to a lower setting.
11
