15

Washing dishes

en

 

 

Programme selection

The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. For example:

Use the« normal» programme for dishes and utensils which have plenty of food remains stuck on hard.

Earn savings

If only a small number of dishes have been loaded into the dishwasher,selecting a programme that operates at the next lowest temperature which should be sufficient.

Programme data

The stated programme data are based on standard operating conditions. The values can vary consider- ably according to:

different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage

machine-related factors (e.g. temperature, water volume,...)

Switching the dishwasher ON

Close the door after loading the appliance.

A

Set On-Off button “B” to On. The state indicator "A" light.

 

 

 

 

Rotate the knob to select programme you wish. After 3 sec-

 

 

 

 

onds the appliance emits a short warning signal, and start

 

 

 

 

the programme, the state indicator "A" blinks.

 

 

 

 

 

 

 

B

Warning

After a washing program ends, the knob indicates the same position as the last washing program. To start another washing program, turn the knob to the reset position, then choose the next washing program.

Page 16
Image 16
Haier DW9-TFE1 Washing dishes, Programme selection, Earn savings, Programme data, Switching the dishwasher on