Use of Remote Controller
1. button: Power on / off the machine. In off status, clock time is displayed and can be
adjusted by pressing Set button, and or button.
2.Mode button: With machined powered on, you can lightly press Mode button to shift between
3.Ppwer button: With machine powered on, press this button to shift heating power level between 850 W, 1300 W and 2150 W.
4. or button: Same as Adjust button on control panel. If not in clock or delay time adjusting status, you can use or button to increase or decrease temperature setting value between 35 - 75 with an increment 1 . If in clock or delay time adjusting status,
these buttons can be used to increase or decrease time.
5.Set button: Press it to set clock time, and press or button to adjust the value. Press Confirm button after adjusting. In
Notes:
1.Remote controller buttons (except Set button) are used in the same way as buttons with same name on control panel. After adjustment is made with Set button, press Confirm button to confirm.
2.Remote controller has a memory function. Upon
3.As an optimum, remote controller shall be used in short distance pointing to the machine vertically. Water immersion shall be avoided. If battery is used up, to prevent battery liquid pollution, please open battery cover in indicated direction, remove used batteries and replace with new batteries installed as original. To avoid explosion, used batteries shall not be kept in hot places or put in fire, but shall be treated in accordance with related local regulations.
Electric Circuit Diagram
Before Usage
Dear users,
Thanks for choosing Haier water heater product.
Haier products have good quality and excellent performance. To facilitate you to use the product, please read the manual and operate accordingly. Please retain it for future reference.
The international star service of Haier Group will always accompany you. No matter what kind of problems you meet in usage, please contact with the local after
The water heater you purchased may not full comply with the manual due to the improvement of product. We apologize for the inconvenience occurred therefrom.
Special Reminding
To ensure proper and safe use of the water heater, we hereby sincerely declare that users shall contact our designated professional service providers for installation and service. For inappropriate installation, Haier would not undertake any liability.
Do disconnect the power supply before any maintenance and repair on the water heater. Unprofessional persons shall not adjust or repair the water heater.
Make sure the machine is full of water before powering it on, otherwise heating element may be damaged. Do ensure power socket complies with local standard and is reliably grounded. Ungrounded use is forbidden.
This electric water heater is provided with a safety valve, which shall not be randomly relocated or blocked.
Hot water above 50 may burn your skin. Do mix hot water and cold water before showering or washing.
At an ambient temperature below 0 , possible ice formation within pipes may break the pipes and cause the machine inoperable. Protection shall be made by emptying water in the tank. In case the water heater will not be used for more than 1 month, please empty the water and unplug the power plug.
If the electric water heater is heavily wetted by water, it should be checked by our authorized technicians before next use.
Hot water inside the water heater is not drinkable. Due to long time use, sediments will form inside the tank, and water quality may also deteriorate due to pipe aging. After washing rice and vegetables with water from the tank, please flush again with clean
MT
L
N E
L: Brown wire
N: Blue wire
MT: High temperature limiter
EH: Heating element
RT: Sensor E:Yellow/green wire
Leakage Coil
Relay Relay Relay
RT
EH
E
W W W
SET | HEATING |
ACTUAL | KEEPING |
water.
Please do not place flammable matters like gasoline nearby the water heater, otherwise accidents like fire may occur.
Features
1.High Technology:
Full PC controlled. Display indicates the actual water temperature, temperature setting, clock and working state. Upon faults, power supply is automatically cut off and the display indicates fault code.
The intelligent heating feature reflects a more humanized design.